Filter
Top Products
3Com Switch 8800 Configuration Guide Chapter 39 802.1x Configuration
39-14
[SW8800-radius-radius1] primary accounting 10.11.1.2
Set the IP address of the secondary authentication/accounting RADIUS servers.
[SW8800-radius-radius1] secondary authentication 10.11.1.2
[SW8800-radius-radius1] secondary accounting 10.11.1.1
Set the encryption key when the system exchanges packets with the authentication
RADIUS server.
[SW8800-radius-radius1] key authentication name
Set the encryption key when the system exchanges packets with the accounting
RADIUS server.
[SW8800-radius-radius1] key accounting money
Set the timeouts and times for the system to retransmit packets to the RADIUS server.
[SW8800-radius-radius1] timer 5
[SW8800-radius-radius1] retry 5
Set the interval for the system to transmit real-time accounting packets to the RADIUS
server.
[SW8800-radius-radius1] timer realtime-accounting 15
Configure the system to transmit the user name to the RADIUS server after removing
the domain name.
[SW8800-radius-radius1] user-name-format without-domain
[SW8800-radius-radius1] quit
Create the user domain 3Com163.net and enters its configuration mode.
[SW8800] domain 3Com163.net
Specify radius1 as the RADIUS scheme for the users in the domain 3Com163.net.
[SW8800-isp-3Com163.net] radius-scheme radius1
Set a limit of 30 users to the domain 3Com163.net.
[SW8800-isp-3Com163.net] access-limit enable 30
Enable idle cut function for the user and set the idle cut parameter in the domain
3Com163.net.
[SW8800-isp-3Com163.net] idle-cut enable 20 2000
Add a local supplicant and sets its parameter.
[SW8800] local-user localuser
[SW8800-luser-localuser] service-type lan-access
[SW8800-luser-localuser] password simple localpass