Filter
Top Products
3Com Switch 8800 Configuration Guide
Chapter 40 AAA and RADIUS/TACACS+ Protocol Con
figuration
40-30
Operation Command
Display related information of user’s
connection
display connection { access-type
{ dot1x | gcm } | domain isp-name |
interface interface-type
interface-number | ip ip-address | mac
mac-address | radius-scheme
radius-scheme-name | vlan vlanid |
ucibindex ucib-index | user-name
user-name }
Display related information of the local
user
display local-user [ domain isp-name |
idle-cut { disable | enable } |
service-type { ftp | lan-access | ppp |
ssh | telnet | terminal } | state { active |
block } | user-name user-name | vlan
vlanid ]
Display the statistics of local RADIUS
server group
display local-server { statistics |
nas-ip }
Display the configuration information of
all the RADIUS server groups or a
specified one
display radius [ radius-server-name ]
Display the statistics of RADIUS packets
display radius statistics
Display the stop-accounting requests
saved in buffer without response
display stop-accounting-buffer
{ radius-scheme radius-scheme-name
| session-id session-id | time-range
start-time stop-time | user-name
user-name }
Reset the statistics of RADIUS server
reset radius statistics
Display the specified or all the
TACACS+ schemes
display TACACS+
[ TACACS+-server-name]
Display the TACACS+ stop-accounting
requests saved in buffer without
response
display stop-accounting-buffer
TACACS+-scheme
TACACS+-scheme-name
Delete the stop-accounting requests
saved in buffer without response
reset stop-accounting-buffer
{ radius-scheme radius-scheme-name
| session-id session-id | time-range
start-time stop-time | user-name
user-name }
Delete the TACACS+ stop-accounting
requests saved in buffer without
response
reset stop-accounting-buffer
TACACS+-scheme
TACACS+-scheme-name
Reset the statistics of TACACS+ server
reset TACACS+ statistics
{ accounting | authentication |
authorization | all }
Enable RADIUS packet debugging
debugging radius packet
Disable RADIUS packet debugging
undo debugging radius packet