Filter
Top Products
3Com Switch 8800 Configuration Guide
Chapter 40 AAA and RADIUS/TACACS+ Protocol Con
figuration
40-24
40.4.2 Configuring TACACS+ Authentication Servers
Perform the following configuration in TACACS+ view.
Table 40-27 Configure TACACS+ authentication servers
Operation Command
Configure the TACACS+ primary
authentication server
primary authentication ip-address
[ port ]
Delete the TACACS+ primary
authentication server
undo primary authentication
Configure the TACACS+ secondary
authentication server
secondary authentication ip-address
[ port ]
Delete the TACACS+ secondary
authentication server
undo secondary authentication
The primary and secondary authentication servers cannot use the same IP address.
The default port number is 49.
If you execute this command repeatedly, the new settings will replace the old settings.
A TACACS scheme authentication server can be deleted only when no active TCP
connection used to send authentication packets is using the server.
40.4.3 Configuring TACACS+ Authorization Servers
Perform the following configuration in TACACS+ view.
Table 40-28 Configure TACACS+ authorization servers
Operation Command
Configure the primary TACACS+
authorization server
primary authorization ip-address
[ port ]
Delete the primary TACACS+
authorization server
undo primary authorization
Configure the secondary TACACS+
authorization server
secondary authorization ip-address
[ port ]
Delete the secondary TACACS+
authorization server
undo secondary authorization