Filter
Top Products
Overview
4
TVM-1600 Endeleo Managed TV Distribution Hub
IR Output Control Port
The IR output port (FIG. 3) enables centrally located hardware to be control using local IR blasters
attached to the connector using a custom cable assembly.
Network Port
This is a standard 10BaseT Ethernet port (FIG. 3), enabling control of the TVM-1600 from the Managed
TV software platform using UDP messaging.
IEC Power Connector
The TVM-1600 uses a universal switch-mode power supply (FIG. 3), which operates from 90-264V AC,
50/60Hz, with a power consumption of 60W.
As a Class 1 appliance the TVM-1600 should be connected to a mains supply with a protective earthing
connection.
The Power On/Off switch is located beside the IEC power connector.
The rating label found to the bottom left of the TVM-1600, beneath the IEC connector,
contains important information applicable to the TVM-1600's installation environment.