Filter
Top Products
Installation
8
TVM-1600 Endeleo Managed TV Distribution Hub
Connecting the TVM-1600 to a UDM Hub
Channels available in a TVM-1600 can be distributed to a UDM Hub by interconnecting the 2 Hubs via
a Cat5 port on the TVM-1600 and an A/V port on the UDM Hub.
4 standard RJ45 ports are located in an AV Inputs section to the front of the UDM Hub, labelled 1
through 4. These 4 ports are dedicated to bringing in TV feeds from the TVM-1600.
To connect a TVM feed into the UDM Hub, run a Cat5 cable from the relevant Port on the TVM-1600
and connect to the relevant AV Input port (1 - 4) on the UDM Hub.
Ensure power on the TVM Ports delivering TV to the UDM Hub has been disabled on
each of the TVM-1600 ports.
Ensure AV inputs are named appropriately within the Inputs section of the Browser
software. The AV inputs are named TVM-AV1 through TVM-AV4.