Filter
Top Products
Configuration - Status Page
23
TVM-1600 Endeleo Managed TV Distribution Hub
Configuration - Status Page
Port Configuration
Port configuration is accessed through the Status option, then clicking on the relevant port hyperlink or
configuration option from the main Status screen.
For this section, we will use the Status option as most administration is performed from here.
By default, the ports are named in numerical order starting with Port 1 through Port 16.
Port Properties
To view a port’s properties:
1. Click on the Status option.
2. Click on the relevant port hyperlink e.g. Port 1.
3. The following is displayed:
Port version
The port controller version information is listed at the top of the page. To view a port’s controller
version;
1. Click on the Status option.
2. Click on the relevant port hyperlink e.g. Port 1 (FIG. 20).
The Status and Port Control options are almost identical – the Port control option
displays a control toolbar which is used to issue controls to devices connected to
TVM ports.
If the Control toolbar is not visible from the Status page, click on Port Control.
•Port Version
• Port name
•Port Power
• TVM-RX03 version (if connected)
• IR remote type
• Address
• Device Port
FIG. 20
Port version 3.1.00