Filter
Top Products
Serial Device Control
48
TVM-1600 Endeleo Managed TV Distribution Hub
Command Line Commands (Cont.)
Reset Controller Resets the controller – reboots as though powered on
!
Get Hub Identification /
System Information
Displays version information for the TVM-1600 controller.
?
Get Port Details Displays port details and details of the device connected (resolution, polarity)
? [port no]
Command Line
Range Commands
Sets the Channel range for the TVM-1600.
This property value may be used in subsequent action commands.
A range may be specified using the min and max values, if max is equal to the min
then a single value will be used.
s [min channel] [max channel]
Set Port Sets the Port range for the TVM-1600.
This property value may be used in subsequent action commands.
A range may be specified using the min and max values, if max is equal to the min
then a single value will be used.
p [min port] [max port]
Set TV System Sets the system (for example, PAL I or NTSC) which the selected port (or range of
ports specified in the Port property) will use.
In most cases a single system is used for all ports on a TVM-1600, and if the port
parameter is zero, all ports will be set with the same system.
t [system value] [port
• TV System Value 1 = PAL 1
• TV System Value 2 = PAL B/G
• TV System Value 3 = PAL D/K
• TV System Value 4 = SECAM
• TV System Value 5 = NTSC M
• TV System Value 6 = NTSC N
• TV System Value 7 = SECAM L
Set Channel Frequency Sets the frequency for a channel on a port (or range of ports).
The frequency is specified in MHz as a decimal number e.g 643.25
f [channel] [frequency] [port]