Filter
Top Products
Configuration - Status Page
24
TVM-1600 Endeleo Managed TV Distribution Hub
Naming a port
1.
Click on the Status option.
2. Click on the relevant port hyperlink e.g. Port 1 (FIG. 21).
3. In the Port name field, type in the name of the port.
Enabling power on a port
The check box to the right of the port power option is to enable the phantom power for that port.
Phantom power delivers power to the TVM-RX03 unit over the twisted pair connection.
To enable power;
1. Click on the Status option.
2. Click on the relevant port hyperlink e.g. Port 1.
3. Click the Port Power tick box.
TVM-RX03 Version
This information is available only if there is a TVM-RX03 unit connected to the port. It will provide the
TVM-RX03 Type as well as the version. For information only (FIG. 22).
IR Remote Type
This option allows a user to set the type of remote the TVM-RX03 unit connected to this port will use.
Typically an Endeleo multifunctional TVM remote is used to control this port.
1. Click on the Status option.
FIG. 21 Naming a port
Port names can be no more than 11 characters.
The illuminated amber LED on the port(s) indicates that Phantom Power is enabled.
Click on Apply power at the relevant port on the Status or Port Control screen to also
enable power.
FIG. 22 TVM-MRX version
FIG. 23 Type of remote control