Filter
Top Products
Configuration - Status Page
29
TVM-1600 Endeleo Managed TV Distribution Hub
1. Click on the Status option.
2. Select the TVM port to where the control will be issued. Use the tick box to the extreme right of
screen to select the TVM Port. The port will highlight in orange.
3. From the bottom toolbar click on the drop down control list beside the 2nd Control. A list of
commands will be visible. Select the second command to be executed for example Play.
4. To execute the command for the selected TVM port click on Send To Included.
Issuing multiple controls to a device
To issue multiple controls to a device:
1. Click on the Status option.
2. Select the TVM port to where the controls will be issued. Use the tick box to the extreme right of
screen to select the TVM Port. The port will highlight in orange.
3. From the bottom toolbar click on the drop down control list beside the 1st Control. A list of
commands (power on, power off, A/V select) will be visible. Select the first command to be
executed e.g. Power on.
4. From the bottom toolbar click on the drop down control list beside the 2nd Control. A list of
commands will be visible. Select the second command to be executed for example Play.
5. In this scenario a device (DVD player) will be powered on and instructed to play – play control
issued after a 5 second delay.
6. To execute the commands for the selected TVM port(s) click on Send To Included.
Multiple ports can be selected for play/stop etc.
Only three commands are appropriate for Control 1; Power On, Power Off and A/V
select.
Multiple ports can be selected for power on/off etc. and play/stop.