Filter
Top Products
Installation
5
TVM-1600 Endeleo Managed TV Distribution Hub
Installation
Rack Mounting the TVM-1600
Rack mounting brackets and screws are located in the accessories box supplied with the TVM-1600.
1. Attach the rack mounting brackets to each side of the TVM-1600 using four M4 screws for each
bracket.
2. Place the TVM-1600 in the rack and hold steady.
3. Two fixing holes are supplied on each side of the TVM-1600. Screw the TVM-1600 into the rack
using the fixing holes.
Exercise extreme CARE when lifting or moving the TVM-1600 within the rack to avoid
injury. It is recommended that you seek the assistance of another person when rack
mounting the TVM-1600.
FIG. 4 Rack Mounting Brackets
To prevent injury the TVM-1600 must be securely attached to the rack in accordance
with the installation instructions.
ALWAYS use the special rack mount brackets supplied and high quality fixing screws
to ensure the TVM-1600 is installed in the rack correctly.
FIG. 5 Fixing Holes
Mounting Holes
DO NOT stand other units directly on top of the TVM-1600 when it is rack mounted,
as this will place excessive strain on the mounting brackets.