AMX TVM-1600 Switch User Manual


 
Important Safety Markings
TVM-1600 Endeleo Managed TV Distribution Hub
Important Instructions
Compliance
FCC and IEC
Compliance with FCC and IEC standards are found within the rating label, see above.
Date of Manufacture
For US customers the date of manufacture is also found underneath the TVM-1600.
Environmental Conditions
Temperature
DO NOT install or operate the Endeleo TVM-1600 in an area where the ambient temperature exceeds
35ºC (95ºF) or falls below 5ºC (35ºF).
Ventilation
DO NOT obstruct the rear or side ventilation grilles during operation as this will restrict the airflow and
may cause the main board to overheat.
The 16 port TVM-1600 is fitted with two cooling fans. These draw cool air through the right side
ventilation grille and expel warm air through the grilles on the left side ventilation grilles.
Humidity
DO NOT install or operate the 16 port Endeleo TVM-1600 in an area in which the ambient relative
humidity exceeds 85% or an area that is prone to condensation.
Water / Liquids
DO NOT install or operate the 16 port Endeleo TVM-1600 near water or in a location which may be
prone to water seepage, dripping or splashing.
DO NOT place objects containing liquids on the appliance.
The TVM-1600 is not waterproof.
External use
DO NOT install or operate the TVM-1600 externally.
This symbol, used within this manual, indicates an important instruction for the
correct and safe installation, operation or maintenance of your Endeleo TVM-1600.
Failure to comply with such instruction may result in injury to person or damage to the
Endeleo TVM hardware.
The criteria on this page must be observed for the installation of the Endeleo TVM-
1600.