Filter
Top Products
Important Safety Markings
TVM-1600 Endeleo Managed TV Distribution Hub
Important Safety Markings
Markings Used In This Manual
The following symbols are used on the Endeleo TVM hardware and throughout this Installation Guide to
advise you of important instructions. All maintenance must be carried out by an Endeleo trained and
qualified engineer.
Voltage
This symbol (FIG. 1) warns the presence of a voltage of sufficient magnitude to cause a severe or fatal
electric shock. Follow the appropriate instructions carefully to avoid the risk of injury.
There are NO user serviceable parts within the TVM-1600.
Rating Label
The rating label, containing important safety information, is found on the bottom left of the TVM-1600
beneath the IEC connector. Symbols used on this label are explained below;
FIG. 1 Voltage symbol
FIG. 2 Rating Label
The TVM Hub is suitable for Alternating current, 100 - 240V AC. (IEC 60417-5032)
FCC (Federal Communications Commission) Standards;
TESTED TO COMPLY
FOR HOME OR OFFICE USE
WITH FCC STANDARDS
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received
including interference that may cause undesirable operation.
Conforms to particular European Directives.