Filter
Top Products
Configuration - Status Page
28
TVM-1600 Endeleo Managed TV Distribution Hub
Sending Controls To a Device
Device controls can be executed from the Status page (FIG. 27) – as well as the Devices page.
The Control tool bar at the bottom bar of the status page can be used to send commands to the remote
device from the web pages.
Issuing primary controls to a device
To issue a first control to a device:
1. Click on the Status option.
2. Select the TVM port to where the control will be issued. Use the tick box to the extreme right of
screen to select the TVM Port. The port will highlight in orange.
3. From the bottom toolbar click on the drop down control list beside the 1
st
Control. A limited list of
commands will be visible (FIG. 28).
4. To execute the command for the selected TVM port click on Send To Included.
Issuing secondary controls to ports
When a device is already powered on, basic control functions such as Play, Stop, Pause etc. can be
executed from the Status page (FIG. 29).
FIG. 27 Status Page controls
Only three commands are appropriate for Control 1; Power On, Power Off and A/V
select.
FIG. 28 Bottom toolbar (1) of the Status page
Multiple ports can be selected for power on/off etc.
FIG. 29 Bottom toolbar (2) of the Status page