Filter
Top Products
UDM-1604 Multi-Format Distribution Hub
2
UDM-1604 Endeleo Multi-Format Distribution Hub
Compatibility
The UDM-1604 is compatible for use with the UDM-RX01 (FG-UDM-RX01) receiver.
Product Specifications
UDM-1604 Specifications
Power Requirements: • 90-264V AC, 50/60Hz
• Max power consumption: 130W
Front Panel Components
IR Sensor: Infrared receive port (IRRX) for learning IR remote control functions from IR con-
trolled devices.
Outputs: 16 RJ-45 ports for connection to Endeleo TVM hubs (via Cat5, Cat5e or Cat6).
A/V Inputs: 4 RJ-45 ports for connection from Endeleo TVM hubs (via Cat5, Cat5e or Cat6).
Rear Panel Components
Network Port: RJ-12 10 BaseT network port is provides network connectivity.
Serial Port: RJ-12 port allows an administrator to control various functions from a command
line prompt.
IRTX Ports: 2 Infrared Transmit (IRTX) ports allow the UDM hub to control IR devices via IR
emitters attached to the UDM. The IR cable is attached to the IR panel of the con-
trolled device to receive IR commands issued through the software or remote
control.
Input Connectors (A-D): 4 sets of Input connections for up to 4 A/V inputs with the following connectors:
• Video
• Audio Left
• Audio Right
• SPDIF
Cascade IN/OUT Ports: These ports allow UDM Hubs to be cascaded together.
• Cascade In Port (from another UDM Hub)
• Cascade Out Port (to another UDM Hub)
IEC Power Connector: Universal switch-mode power supply.
• As a Class 1 appliance the Hub should be connected to a mains supply with a
protective earthing connection.
• The Power On/Off switch is located beside the IEC power connector.
Note: The rating label found to the bottom left of the hub, beneath the IEC con-
nector, contains important information applicable to the Hub’s installation environ-
ment.
Network Interface: 10baseT
Serial Interface: 9600, 8, N, 1
Max Video Input: • 4 x RGBHV (or)
• 4 x S-Video (or)
• 12 x CVBS (plus)
• 4 x Endeleo TVM-1600 or CVBS
Operating Environment: • 35°F - 95°F (5°C - 35°C)
• Max. relative humidity - 85% (non-condensing)
Dimensions (HWD):
1 3/4" x 19" x 12 1/2" (45 mm x 440 mm x 320 mm)
Weight:
8.8 lb. (4 Kg)
Certifications: • CE/UL/FCC part 15 Class A