Filter
Top Products
Device Configuration and Control
30
UDM-1604 Endeleo Multi-Format Distribution Hub
Issuing controls to a centrally located IR device
1. The control bar at the bottom of the browser screen enables specific controls to be executed via the
browser connection(FIG. 32).
2. Select the control(s) to be performed for this device. Two controls can be issued to a device 1
st
and
2
nd
(FIG. 33).
3. Click the tickbox beside the relevant device to select the device to be sent a control. It will highlight
in orange.
4. Click on Send to Included to send the control to the device.
5. Alternatively such controls can be scheduled to occur later. Refer to the Scheduling Events section
on page 43 for details.
Custom Controls
Custom Controls permits the Administrator to specify custom IR controls which can sent to the device or
display. A list of custom controls and their IR value can be found in Appendix A of this guide.
To issue a custom control;
1. Select the custom option within the 2
nd
list of commands.
2. Type in the value of the IR code which is to be sent in the relevant box.
3. Execute the custom control or schedule it to occur later.
The UDM hub needs to learn the device’s IR protocol i.e. which button on its remote
performs which function. Refer to the Protocols and IR Learning section of this
manual.
FIG. 32 Command bar for issuing commands to a Device
FIG. 33 Optional controls for a device
The first command is limited to Power On, Off and A/V Select.