Filter
Top Products
Operating the UDM Hub
39
UDM-1604 Endeleo Multi-Format Distribution Hub
Assigning a Command to an Endeleo UDM-RC02 Remote Control
1.
Click on the Status page. Click the appropriate Port name hyperlink.
2. Click on User Control at the top right of the screen (FIG. 48).
3. Look at the keys (0 to F, which represent the keys on the UDM-RC02 Remote Control) to the left of
screen.
4. In line with the Key (e.g. key F) move the mouse across to the Control field and select the command
from the drop down list which this key (key F) on the UDM-RC02 Remote Control will issue. For
Example choose Play (FIG. 49).
5. Now select whether this button (on the remote control) should be associated with the Port (display
device) or an actual Device (e.g. a DVD player added to the system as a device) when it is pushed.
6. The Endeleo RX unit will now accept the relevant command from the UDM-RC02 Remote Control
i.e. key F on the UDM-RC02 Remote Control will play the device (DVD).
Ensure the Infrared command which the UDM-RC02 Remote control will issue has
been learned by the Hub first. Refer to the Protocols and IR learning section of this
manual.
FIG. 48 User Control option
From the main status screen click on User Control at the correct port to access the
User Control screen also.
FIG. 49 Assigning Play to key F on the Endeleo remote control
Ensure the correct key on the Endeleo Remote RX01 corresponds with the correct
command.