Filter
Top Products
Hub Configuration
18
UDM-1604 Endeleo Multi-Format Distribution Hub
Configuring the Hub
Each Hub can be configured for the correct network environment. It is also possible to configure each
Hub for the correct date and time.
Network configuration
Hubs can be configured for the network environment using the Setup page.
1. Click on the Setup option to the left of the screen.
2. The following Hub options should be configured from this page (FIG. 15):
a. Hub IP Address, Subnet Mask and Default Gateway;
b. UDP Port (default is 2008) and
c. Hub name (maximum of 30 characters).
3. Once the network environment has been configured, click on Update.
Date and Time configuration
The Setup page is also used to set up the hub date and time, which is used for scheduling.
1. To configure the Hub’s Date and Time, ensure the Setup page is displayed.
2. Configure the Hub by typing in the correct values for the Time and Date.
3. Click on Update when all configuration changes have been completed.
Checking the Hub Time
Clicking on the date and time on the screen simply refreshes the clock to the current time. This can be
useful before creating a scheduled event (FIG. 16).
FIG. 15 The Setup Page
The UDM1604 does not support DHCP. Please configure a static IP Address.
All changes are immediate - once the IP address of the hub has been changed
redirect the web browser to the changed address.
FIG. 16 Hub Date and Time