Filter
Top Products
Input Configuration
21
UDM-1604 Endeleo Multi-Format Distribution Hub
Input Configuration
The second stage in configuring a Hub is to set up the video types and audio sources being presented to
each input port and where appropriate renaming these. This is all achieved through the Inputs page.
Configuring Inputs A-D
1. Select the Inputs option from the available options to the left of screen. The main Inputs screen is
displayed (FIG. 18).
2. An input port can be set to accept (a) a local source or (b) the equivalent source from the previous
hub in a cascaded system (Cascade option enabled).
3. Select the appropriate Input Type. For RGB, VGA, Component or SVideo inputs, only one
connection is possible per input port (FIG. 19).
4. Name the Input Type appropriately.
FIG. 18 Input configuration page
FIG. 19 Input configuration page - Selecting the Input Type