Filter
Top Products
Advanced Administration
59
UDM-1604 Endeleo Multi-Format Distribution Hub
Backend Commands
In case of human error the Command Line can be used to perform several Administrative tasks on the
multi format video hub.
Changing the Login Password
1.
Create a hyperterminal session with the UDM hub using default serial connections.
2. To change the password enter the original password and new password separated by a colon at the
login prompt.
For Example type in admin:endeleo at the login prompt, to change the password from admin to
endeleo.
3. Reset the Hub. A power off then on is now required.
Obtaining the Hub’s IP Address Via the Command Line
1.
Type i at the command prompt. (FIG. 77) Push enter.
Checking Port Details
Port details (resolution, port firmware) can be checked via the command line also.
Multi Format Inputs
The multi format inputs located at the rear of the Hub are numbered 129 through to 132 for
administrative purposes.
1. To check the input port configuration, type in the following – a question mark followed by the Input
Number (129, 130, 131 or 132):
Example: ? 129
2. Push Enter.
3. The following information will be displayed (FIG. 78);
FIG. 77 Issuing the i command
Multi format inputs
Input Input Number
A 129
B 130
C 131
D 132
FIG. 78
Querying a multi format input port