Filter
Top Products
Wiring and Connections
7
UDM-1604 Endeleo Multi-Format Distribution Hub
Wiring and Connections
UDM-1604 Front Panel Components
The components on the front panel of the UDM-1604 are described below (FIG. 4).
IR Learning Sensor
An IR receive port is found at the front of the UDM Hub to the right hand side. This is used to learn
device IR remote control functions from devices such as DVD players, VCRs etc. Common functions
learned include Power on, Power off, Play, Pause, Stop, etc.
Refer to the Protocols and IR Learning section on page 31 for details.
OUTPUT Ports (RJ-45)
The 16 RJ-45 ports on the front panel of the UDM (labelled “OUTPUTS”) provide connectivity to
UDM-RX01 or UDM-RX02 Multi-Format Receivers. This is a standard RJ-45 connector, and UDM
Receivers can be connected via either Cat5, Cat5e or Cat6 cabling (FIG. 5).
UDM Port Pinouts
The following table describes the pinout configuration of the UDM port:
FIG. 4 UDM-1604 - Front Panel Components
FIG. 5 RJ-45 Pinouts
UDM Port Pinouts
Pair Color RJ45 Pin Polarity Endeleo Function
1
White / Blue 5 -
Green
Blue 4 +
2
White / Orange 1 +
Red
Orange 2 -
3
White / Green 3 +
Blue
Green 6 -
4
White / Brown 7 +
Bi-Directional Control, Digital Audio, Phantom Power
Brown 8 -, Gnd