Filter
Top Products
Hub Configuration
19
UDM-1604 Endeleo Multi-Format Distribution Hub
Restoring Hub Configuration and Connections
To ensure the configuration settings for the Hub are retained each time the hub boots it is advisable to
ensure the following options have been enabled.
Restoring configuration and connections
To ensure network configuration and port configuration are restored on boot up select the Restore
configuration on power up.
1. Select the Setup option from the options available.
2. Ensure the checkbox beside Restore configuration on power up has been selected (FIG. 17).
Restoring connections on power up
To ensure inputs are transmitted to the outputs (or ports) on boot up select the Restore connections on
power up.
1. Select the Setup option from the options available.
2. Ensure the checkbox beside Restore connections on power up has been selected.
Hub Reset
Where appropriate the Hub can be reset from the Browser interface. Use the Setup option to reset the
Hub.
1. To reset the Hub click on the Setup option from the left side of the screen.
2. Towards the bottom of the Setup screen the Hub Reset button will be visible (FIG. 17).
3. Click the Hub reset button to reset the hub. The Hub’s network connection will be lost temporarily
and video displays will switch off then on again very quickly.
FIG. 17 Restoring configuration on power up
Failure to select the Restore Configuration and Connection options will mean if the
Hub is reset the Hub configuration and connections will need to be re-configured.
A power down of the Hub should now be performed to complete the reset procedure.