Filter
Top Products
Input Configuration
23
UDM-1604 Endeleo Multi-Format Distribution Hub
5. Configure the default channels for each TVM input. For example if you enter "12" in the text field
for TVM-AV1, then every time a UDM user selected TVM-AV1 then they would be initially
switched through to TV channel 12. The channel name is manually entered and helps the user
recognize this from the input selection drop down box on the status page.
Configuring Audio Types For Inputs
Audio types (Analog L/R or S/PDIF) can be configured for each Input. To configure audio for individual
Inputs;
1. Click on Inputs.
2. In the audio section of the Inputs option, under the Type column, select the type of audio (Analog L/
R or S/PDIF) for the relevant input (FIG. 23).
FIG. 22 Configuring TVM inputs for a UDM-1604
If through the user selection page you have enabled pass through (i.e. the ability for
the user to send commands through to the TVM hub to change the channel), then
you may find that the text no longer reflects channel being viewed. If this feature is to
be used, try using a generic channel name such as "TVM port X".
FIG. 23 Configuring audio types for inputs
Ensure audio has been connected from the Input to the rear of the hub. Ensure the
connections are sound and fixed correctly.