Filter
Top Products
Input Configuration
24
UDM-1604 Endeleo Multi-Format Distribution Hub
Cascaded Inputs
UDM Hubs can transmit inputs from other UDM Hubs if cascaded together.
1. To display an input from a cascaded Multi Format Video Hub, click on the checkbox beneath the
Cascade column beside the relevant input.
2. For example if an Administrator selects Cascade beside Input A in this Hub, then Input A from the
Hub(s) interconnected (cascaded) above will be displayed through Input A of this Hub.
Cascaded Audio
UDM Hubs can transmit audio (and video) from other UDM Hubs if cascaded together. To cascade
audio;
1. Click on the Inputs option.
2. In the Audio section click on the checkbox beneath the Cascade column beside the relevant audio
for the correct input (A, B, C or D).
Renaming Output Ports
1. For easier management the system allows the Administrator to rename any of the Output ports.
2. Click on the Status option from the left hand side of the screen. The 16 output ports should now be
visible (FIG. 24).
3. Simply click on the relevant Port Name hyperlink on the Status page.
4. The Port Configuration page will now be displayed (FIG. 25).
5. Name the port appropriately.
The Endeleo cascade cable (UDM-EXP-01) will be connected to the relevant UDM
hubs to permit input cascading. Refer to the Advanced Administration & Technical
Data section on page 31 to configure a cascaded system.
FIG. 24 Output Ports
FIG. 25 Configuration options for Output ports