Filter
Top Products
Advanced Administration
61
UDM-1604 Endeleo Multi-Format Distribution Hub
Copying IR/Serial Tables
To copy the IR/Serial tables from a UDM hub:
1. Run your TFTP client. If using the Windows client, move to step 2.
2. Create a folder on the C: drive named Endeleo.
3. Open a command prompt (Start, Run, type "cmd" <enter>) and change it to the C:\Endeleo
directory.
4. Connect the serial cable (RJ12 to DB9) that is supplied with the UDM Hub.
5. Open a Hyperterminal session and connect to the UDM hub (9600, 8, None,1, None)
6. Type the following command at the prompt:
TFTP -i <ip address of the udm hub> get ixxxx.hub <enter>
Example:
C:\Endeleo\TFTP -i 192.168.1.201 get iudm.hub <enter>
7. After hitting Enter, you should watch the Hyperterminal session window to see the file download
from the UDM hub.
8. The transfer is now complete.
Windows XP Pro has a built in TFTP client program. If you are using another
operating system, or have an alternate TFTP client, follow the directions of your OS
and install TFTP client if necessary. Consult with AMX Technical Support as to the
appropriate client for your OS.
FIG. 81 GET iudm.hub prompt
FIG. 82 File download from the UDM hub