Filter
Top Products
Input Configuration
22
UDM-1604 Endeleo Multi-Format Distribution Hub
5. If the Input Type is Composite, then the screen will refresh and enable the administrator to name
each of the 3 available composite sources separately (FIG. 20).
6. Name the Composite Video types appropriately.
Configuring TVM (AV) Inputs
TV Inputs from an Endeleo TVM hub can also be fed into the UDM hub for display at screens
throughout the location.
Configuring TVM inputs for a UDM Hub
1.
Ensure the port on the TVM is configured to display the correct channel – refer to the TVM
documentation.
2. Ensure the power on the TVM port which will transmit the TV feed has been switched off using the
[k] [port no] command (or using the Web Browser).
3. Connect a Cat5 cable from the TVM port to the relevant TVM port on the front of the UDM hub
(FIG. 21).
4. Click on the Inputs option and in the Inputs section configure the TVM input - Name the port
accordingly (FIG. 22).
FIG. 20 Possible Composite Video sources
The power at the relevant TVM port will have to be disabled using the <k> <port no>
command or through the TVM Web Browser before being connected to a UDM Hub.
Refer to the TVM1600 User Guide.
FIG. 21 TVM (AV) inputs