Filter
Top Products
Operating the UDM Hub
37
UDM-1604 Endeleo Multi-Format Distribution Hub
User Control
Administrators can issue commands from the UDM Browser Interface. These commands are issued
from;
The toolbar located at the bottom of the web browser to the selected ports;
The user control drop down options from the Status page for the relevant port or
The user control section from within a selected port i.e. once a port’s hyperlink has been
clicked the User Control option will be visible.
Issuing Commands To a Port
Control of the input is performed in a similar way to changing the input to be displayed. A Control or
command can either be issued per Input or issued across all or groups of ports.
1. Click on the Status option. Ensure the relevant port is known.
2. Click on the downward arrow to the right of the Control field. Refer to (FIG. 44).
3. A standard list of controls programmed into the web interface will be displayed. Select the required
control (FIG. 45).
4. Once selected click on the Execute button (FIG. 46). The command will be executed for the
relevant port.
Schedules are also used to issue commands at a pre-determined time to inputs and
devices.
Ensure the device’s Infrared commands have been learned by the Hub first. Refer to
the Protocols and IR Learning section.
FIG. 44 Selecting a control to be executed at the port(s)
FIG. 45 Standard list of Controls
Where a custom control is required type in the IR code for the command. Refer to the
Appendix B – Endeleo IR Codes section on page 65.
FIG. 46 Execute button