Filter
Top Products
ARM Instruction Reference
ARM DUI 0068B Copyright © 2000, 2001 ARM Limited. All rights reserved. 4-51
4.4.7 SMLALxy
Signed multiply-accumulate (16-bit by 16-bit, 64-bit accumulate).
Syntax
SMLAL<x><y>{cond} RdLo, RdHi, Rm, Rs
where:
<x>
is either
B
or
T
.
B
means use the bottom end (bits [15:0]) of
Rm
,
T
means
use the top end (bits [31:16]) of
Rm
.
<y>
is either
B
or
T
.
B
means use the bottom end (bits [15:0]) of
Rs
,
T
means
use the top end (bits [31:16]) of
Rs
.
cond
is an optional condition code (see Conditional execution on page 4-4).
RdHi, RdLo
are the ARM registers for the result. They also hold the add-in value.
Rm, Rs
are the ARM registers holding the values to be multiplied.
r15 cannot be used for any of
RdHi
,
RdLo
,
Rm
, or
Rs
.
Any combination of
RdHi
,
RdLo
,
Rm
, or
Rs
can use the same registers.
Usage
The
SMLALxy
instruction multiplies the signed integer from the selected half of
Rs
by the
signed integer from the selected half of
Rm
, and adds the 32-bit result to the 64-bit value
in
RdHi
and
RdLo
.
Condition flags
This instruction does not affect any flags.
Note
This instruction cannot raise an exception. If overflow occurs on this instruction, the
result wraps round without any warning.
Architectures
This instruction is available in all E variants of ARM architecture v5 and above.