Filter
Top Products
Checking for ACD 1
Issue 1.0 December 2003 13
Checking for ACD 1
The upgrade tool cannot upgrade a system where ACD 1 is not administered.
To determine if the system does not have ACD 1 administered:
1. Log on to CMS.
2. Select System Setup > Switch Setup > List All to display a list of the administered
ACDs. This list will show if ACD 1 is not administered.
3. To add temporary ACD 1:
a. Enter:
cmsadm
b. Select the number that corresponds to the acd_create option.
This adds the first unassigned ACD, which will be ACD 1.
c. Enter the switch name and switch model, enable vectoring, enable disconnect
supervision, and enter 1 for the local port and enter 1 for the remote port.
d. When you select a link device, use either TCP/IP with an invalid IP address, or use
X.25 and select one of the loopback links. Since the ACD is deleted after the
upgrade, it is acceptable to assign an invalid IP address or loopback link.
e. For the remaining options, use the defaults or minimum values.