Filter
Top Products
Resetting the CONSOLE parameter
Issue 1.0 December 2003 71
Resetting the CONSOLE parameter
After you have migrated the customer data and you are about to finish the upgrade, you
must reset the CONSOLE parameter in the /etc/default/login file.
To reset the CONSOLE parameter:
1. Enter:
vi /etc/default/login
2. Search for the following lines:
3. Delete the leading pound sign (#) on the CONSOLE=/dev/console line. It should look
like the following:
4. Press ESC.
5. Enter:
:wq!
This writes and quits the file.
6. Continue with Replacing the customer’s tapes
on page 72.
.
.
# If CONSOLE is set, root can only login on that device.
# Comment this line out to allow remote login by root.
#
#CONSOLE=/dev/console
.
.
.
.
# If CONSOLE is set, root can only login on that device.
# Comment this line out to allow remote login by root.
#
CONSOLE=/dev/console
.
.