Filter
Top Products
Copying and activating the customer’s administration and options
70 Avaya CMS R12 Sun Enterprise 3500 Computer CMS Upgrade Express
3. In the R3 Migrate Data window, select the options and enter the values that are
indicated in the following table:
4. Press Enter to access the action list in the top right corner.
5. Select Run and press Enter.
The progress of the migration is displayed in the Status field. When the migration
ends, the system indicates the success or failure of the migration in this field.
6. Press F3 and select the UNIX option to display the UNIX prompt.
7. Enter:
pg /cms/migrate/r3mig.log
The customer migration log is displayed.
8. Look at the contents of the customer migration log and take any necessary corrective
action. For help with interpreting the log, contact technical support or your customer
representative.
9. To exit the UNIX window, enter:
exit
10. Select System Setup > CMS State to put CMS into multiuser mode.
11. Continue with Resetting the CONSOLE parameter
on page 71.
Field Value to enter or option to select
Device name The tape drive device name
Data Type Agent/Call Center Admin data
Specify ACD(s) All ACDs