Filter
Top Products
Copying and activating the customer’s administration and options
72 Avaya CMS R12 Sun Enterprise 3500 Computer CMS Upgrade Express
Replacing the customer’s tapes
After migrating the customer’s data, remove the tapes from the tape drives and replace
any tapes that the customer originally had in the tape drives. These tapes that the
customer had in the tape drives may be used for scheduled backups and must be replaced
before leaving the customer site.
Continue with Checking the status of the disks
on page 72.
Checking the status of the disks
After migrating the customer’s data, you should verify that the disks have synchronized
successfully or are actively synchronizing.
To check the status of the disk drives:
1. Enter:
. /opt/informix/bin/setenv
2. Enter:
onstat -d | egrep “PD|X” | pg
One of the following occurs:
● If nothing other than the command prompt is displayed, continue with Turning the
upgraded system over to the customer on page 72.
● If any lines display X, the disk requires maintenance. Escalate through normal
channels.
Turning the upgraded system over to the customer
After the data migration is complete, the customer must follow the post-upgrade
procedures found in Avaya Call Management System (CMS) Release 12 CMS Upgrade
Express (CUE) Customer Requirements. Inform the customer that they must follow these
procedures to complete the upgrade.