Filter
Top Products
Issue 1.0 December 2003 31
Removing and replacing disk drives
This section contains the procedures that are required to upgrade the disk drives to CMS
R12. Using these procedures, you must remove the old disk drives in the computer and
replace them with new disk drives that are preloaded with the CMS R12 software.
!
CAUTION:
CAUTION: Customers must not reuse their old disk drives as part of the upgrade
procedure. These old disk drives should be saved to be used for system
recovery in case any problems occur during the upgrade procedure.
Prerequisites
Obtain an ESD wrist strap before beginning this procedure.