Filter
Top Products
Chapter 7 The TSP Configuration Tool
Page 7-6 Version 4.0 CPSEE_TSP500 User Guide
This document is confidential and proprietary to SER Solutions and is not for external use.
Trunk Protocol Selection and Storage Information
The available ISDN Protocol Variants are listed in Table 7-1. The NMS
Variant Name is stored in the /opt/ser//cfg/trunks.cnf file. The NMS Down-
loadable Module name is stored in the card’s configuration file /opt/nms/cg/
cfg/cg<slot>.cfg.
The available CAS Protocols are listed in Table 7-2. The Protocol Name is
stored in the /opt/ser//cfg/trunks.cnf file.
The TSP also supports AP2 CAS Protocol. This is a non-compelled R2 CAS
protocol utilized in Australia. Although targeted for Australia, this protocol
can be connected to the International Addit600 channel bank to provide an
Analog Station solution in other countries.
Table 7-1: ISDN Protocol Variants.
Printed Name NMS Variant Name T1 or E1
NMS Downloadable
Module (DLM)
AT&T 4ESS AT4 T1 c65igen
AT&T 5ESS E10 T1 c65igen
DMS DMS T1 c65igen
NI2 NI2 T1 c65igen
Australian Telecom 1 AUS E1 c65igen
EMCA-QSIG QSIG E1 c65igen
EuroISDN ETSI E1 c65igen
France Telecom VN6 VN6 E1 c65igen
Table 7-2: CAS Protocols
Printed Name T1 or E1 Protocol Name
WINK INBOUND T1 wi
WINK OUTBOUND T1 wo
WINK INBOUND/OUTBOUND T1 wio
IMMEDIATE INBOUND T1 immi
IMMEDIATE OUTBOUND T1 imm