Filter
Top Products
Chapter 3 Starting/Configuring TSP500
Page 3-4 Version 4.0 CPSEE_TSP500 User Guide
This document is confidential and proprietary to SER Solutions and is not for external use.
Admin Terminal
Once the TSP is running, you can access the Admin Terminal (dumb termi-
nal) by selecting the Admin_Terminal item in the menu. You can also
access the Admin Terminal using the Linux login dumb1.
The Admin_Terminal selection from the TSP menu system has options to
control the TSP. The following are some key pieces of information regarding
the Admin_Terminal:
1. Customer Support can use the Admin_Terminal command stoptsp to
shutdown the TSP application remotely. You can select Activate_TSP to
to restart the TSP.
2. The Admin_Terminal command quit is used to disconnect the
Admin_Terminal from the TSP. You must then press Enter twice to fin-
ish the disconnection process. You will return to the TSP Main Menu.
3. Immediately after starting the TSP application and entering into the
Admin_Terminal, you will see “Enter Command.” After entering a com-
mand, it may take one to two minutes for the full application to start
before you receive a response from the terminal. This is normal.
4. See TSP500 Admin Terminal Commands in “Features and Enhance-
ments” on page 4-1 of this document.