Filter
Top Products
Chapter 5 Admin Terminal Commands
Page 5-4 Version 4.0 CPSEE_TSP500 User Guide
This document is confidential and proprietary to SER Solutions and is not for external use.
CALL
Displays the ISDN parameters defined for the specified span
.
Syntax: call <span #>
CAPTURE
Allows recording of raw audio signals for use in voice detection analysis.
Hook Status Traces hook changes received from Digital Sta-
tions. It displays the Station Number and hook
state (On or OFF).
DTI Events Traces NMS Digital Trunk Monitoring Events. A
description of these events can be found in the
NMS Digital Trunk Monitor Service Developer’s
Reference Manual (P/N 9000-6392).
Alarm Events Traces events, and actions associated with trunk
alarms on the TSP.
DSP Events Traces NMS DSP Events. A description of these
events can be found in the ADI Service Developer’s
Reference Manual (P/N 9000-62162) and the Voice
Messaging Service Developer’s Reference Manual
(P/N 9000-6422).
Conference Events Traces events, and actions associated with Confer-
encing or Monitoring.
Call Events Traces events associated with NMS’s Natural Call
Control API. Natural Call Control is NMS’s generic
API used for Call-Setup across a variety of Network
Interfaces. A description of these events can be
found in the NMS Natural Call Control Service
Developer’s Reference Manual (P/N 9000-6708).
Application Events Provides additional tracing information typically
associated with NMS events.
Lights This option traces the Protocol B messages associ-
ated with the Light Display. (The light display is not
currently supported on the CPSEE_TSP500)
CONNECTS Traces the low level functions used for time slot
connection on the Telephony Buss.
ACD Traces the Interactive Voice Response (IVR) calls.
CLOCK Traces changes to the T1/E1 clock.
Table 5-1: Bug Traces.
Bug Trace Description
Note:
Intended for engineering use
only.