Filter
Top Products
Chapter 3 Starting/Configuring TSP500
CPSEE_TSP500 User Guide Version 4.0 Page 3-13
This document is confidential and proprietary to SER Solutions and is not for external use.
Reset ISDN Configuration
Reset ISDN Configuration will reset the selected span(s) to default settings.
Configuring the Syslog
The configuration file for controlling the TspLogger will be the file sys-
log.cnf (probably located in the /opt/ser/cfg directory). The following
describes the keywords used for configuring the TspLogger.
There are three configuration items that you can use to configure the TspLog-
ger. SYSLOG_HOST is the only required assignment. The other two are
optional.
Figure 3-21. View ISDN Configuration.
Figure 3-22. Reset ISDN Configuration.
Table 3-3: TspLogger configuration elements.
Element Description
SYSLOG_HOST IP address of the PC where the syslogger resides.
This should be entered using dot notation.
Example: SYSLOG_HOST 192.168.2.10