Filter
Top Products
Chapter 5 Admin Terminal Commands
Page 5-24 Version 4.0 CPSEE_TSP500 User Guide
This document is confidential and proprietary to SER Solutions and is not for external use.
RecBits = 0e
0 Recording Required
1 0 = Move File. 1 = Concatenate File.
1 Record 1 Minute Snipits
1 Use Closing Threads
0 Use VCE instead of ADI
0
0
0
0
0
0
0
0
0
0
0
Recording Required
If this bit is set, then the TSP will stop dialing if any of the recording compo-
nents are not operational.
0 = Move File 1 = Concatenate
Defines whether snippet files should be moved or concatenated.
Record 1 Minute Snippets
If this flag is turned off, then TSP will record a single audio file rather than 1-
minute snippets.
Use Closing Threads
Specifies whether a thread should be used to close audio files. This also
affects TTS and should normally be set to one.
Use VCE instead of ADI
Specifies to use the alternate method for recording. Under VCE there are no
buffer full events generated. However, there may be gaps between the snip-
pet recordings. If snippets are not used, then VCE is the preferred method. If
snippets are used, ADI is the preferred method.