Filter
Top Products
Chapter 8 TSPLogger
Page 8-4 Version 4.0 CPSEE_TSP500 User Guide
This document is confidential and proprietary to SER Solutions and is not for external use.
Configuration
The configuration file for controlling the TspLogger will be the file sys-
log.cnf (located in the /opt/ser/cfg directory). The following describes the
keywords used for configuring the TspLogger.
This file can be accessed via an item in the Configuration Menu on the TSP.
Example:
===============================================
TSP Configuration [tspdev10]
(c) Copyright 2003-2004 SER Solutions Inc.
===============================================
A....DialingRules
B....DnisConfiguration
C....ISDNConfiguration
D....Strategies
E....SysLogConfiguration
F....Tools
G....Trunks
H....WriteCfigToArchive
Select Item:
The following describes the three configuration items used to configure the
TspLogger. SYSLOG_HOST is the only required assignment. The other two
are optional.
SYSLOG_HOST
IP address of the PC where the syslogger resides. This should be entered
using dot notation.
Example:
SYSLOG_HOST 192.168.2.10
SYSLOG_PORT
This keyword is optional. The default port used for TspLogger is the industry
standard port 514. If for some reason you need to use another port, this key-
word can be used to assign it.
Example:
SYSLOG_PORT 9400