Filter
Top Products
Chapter 7 The TSP Configuration Tool
Page 7-26 Version 4.0 CPSEE_TSP500 User Guide
This document is confidential and proprietary to SER Solutions and is not for external use.
The first four trunk spans on this card are running ISDN AT&T 4ESS proto-
col. The next five trunk spans are configured to run CAS Group 1 which is
Wink Outbound. The last seven trunk spans are for Stations. The Analog Sta-
tions are defined last and will always run Immediate Start Inbound. The Dig-
ital Stations are defined above the Analog Stations and are running CAS
protocol Wink Outbound since they were defined as Remote Agents. Finally
the VoIP Stations are defined running CAS protocol Wink Inbound since they
were defined to be Nailups.
The card layout for this configuration is:
For this configuration it is expected that a CG 6500C-0L/8TE card be loaded
above the Processor Card followed by a CG 6500C/64-0L/16TE card.