Filter
Top Products
Chapter 5 Admin Terminal Commands
CPSEE_TSP500 User Guide Version 4.0 Page 5-11
This document is confidential and proprietary to SER Solutions and is not for external use.
LICENSE (lic)
Displays current licensed inventory and features.
Syntax:
license
LINKP
Establishes a connection between any two devices. A device can be a trunk,
station, or DSP.
Syntax: linkp <source Matrix Number> <dest Matrix Number> [B]
The connection is made so that the <dest> device is listening to the <source>
device. Normally, the <source> device is not listening to the <dest> device,
but if the B option is used, a connection is made so that the <source> device is
listening to the <dest> device. If two stations are connected using the B
option, they can carry on a conversation.
LLOOP
Establishes a Local Loopback on the specified T1 or E1 span.
Syntax: lloop <span #>
The span # is the card slot number displayed in the slots screen. Any span
that is in local loopback will have the text L_LOOP displayed at the end of
the line associated with that span.
Entering the same command again will toggle the local loopback off.
LOAD
Forces a load of the dialing rules. You can import selected configuration
items.
Note:
For Engineering use only.
Table 5-4: Load categories.
Category Description
load all Load All Dynamically
load groups Load Trunk Groups
load isdn Load ISDN Configuration