Filter
Top Products
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 211
53-1001931-01
Priv Exec command
4
upgrade
Priv Exec command
Upgrades the software image
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
upgrade <URL>
{background}
Parameters
Example
RFController#upgrade tftp://157.235.208.105:/img
var2 is 10 percent full
/tmp is 2 percent full
Free Memory 161896 kB
FWU invoked via Linux shell
Running from partition /dev/hda5, partition to
update is /dev/hda6
Reading image file header
Removing other partition
Sep 08 15:57:18 2010: %KERN-6-INFO: EXT3 FS on
hda1, internal journal.
Making file system
Extracting files (this can take some time).Sep
...........................
Jan 08 15:58:17 2009: %DIAG-4-CPULOAD: One
minute average load limit exceeded,
value is 100.00% limit is 99.90% (top process
kernel/ISR 100.00%)
Sep 08 15:58:44 2009: %PM-4-PROCNORESP: Process
"logd" is not responding
Jan 08 15:58:44 2009: %PM-4-PROCNORESP: Process
"logd" is not responding
Jan08 15:58:44 2009: %PM-4-PROCNORESP: Process
"logd" is not responding
Jan 08 15:58:44 2009: %PM-4-PROCNORESP: Process
"logd" is not responding
Version of firmware update file is 4.3.0.0
19193X
Jan08 15:58:44 2009: %KERN-6-INFO: EXT3 FS on
<URL> Location of the target firmware image used in upgrade
background Optional. Specifies that the upgrade should occur in the
background.