Filter
Top Products
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 705
53-1001931-01
Chapter
21RTLS Instance
In this chapter
•RTLS config commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 705
Use the
(config-rtls) instance to configure Real Time Location System (RTLS) parameters.
To navigate to this instance, use the command
RFController(config)#rtls
RFController(config-rtls)#
RTLS config commands
This summarizes config-rtls commands:
TABLE 23 RTLS Commands
Command Description Ref.
aeroscout Configures aeroscout parameters page 706
clear Clears locationing information page 707
clrscr Clears display window page 708
end Ends the current mode and moves to EXEC mode page 709
espi Configures ESPI parameters page 710
exit Ends current mode and moves to the previous mode page 711
help Description of the interactive help system page 712
ekahau Configures ekahau parameters page 713
no Negates a command or sets its defaults page 714
reference-tag Configures reference tags page 716
rfid Configures RFID readers page 717
service Invokes service commands to troubleshoot or debug
(config-rtls) instance configurations
page 718
show Displays the running system information page 721
site Configures site parameters page 723
sole Configures Smart Opportunistic Location Engine (SOLE)
parameters
page 724
controller Configures controller parameters page 725
zone Configures zone page 726
ap Configures AP specific RTLS parameters page 727