Filter
Top Products
590 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Wireless configuration commands
20
broadcast-tx-speed Sets the rate at which broadcast and multicast
traffic is transmitted
page 611
client Defines the wireless client configuration page 612
clrscr Clears the display screen page 615
cluster-master-support Changes settings for cluster master support. This is
required for cluster-level functions
page 616
convert-ap Changes an AP’s mode of operation page 617
country-code Configures the country of operation. All existing
radio configurations are erased.
page 619
debug Debugging functions. page 620
dhcp-one-portal-forward Enables forwarding of DHCP responses to one
portal.
page 623
dhcp-sniff-state Records wireless client DHCP state information page 624
dot11-shared-key-auth Enables support for 802.11 shared key
authentication
page 625
end Ends the current mode and moves to the EXEC
mode
page 626
exit Ends the current mode and moves to the previous
mode
page 627
fix-broadcast-dhcp-rsp Converts broadcast DHCP server responses to
unicast responses
page 628
help Displays the interactive help system page 629
hotspot Configures Hotspot configuration information. page 630
load-balance Sets the user load balance mode page 631
mac-auth-local Defines the local MAC authentication list page 632
manual-wlan-mapping Allows the manual mapping/un-mapping of WLANs
to configured radios
page 634
wireless-client Configures wireless client parameters page 635
mobility Configures mobility parameters page 636
multicast-packet-limit Sets a multicast packet limit (per second) for a
VLAN
page 637
multicast-throttle-waterm
ark
Configures watermarks for handling bursts of
broadcast/multicast frames
page 638
nas-id Configures the NAS ID to be sent to the RADIUS
server.
page 639
nas-port-id Configures the NAS port to be sent to the RADIUS
server.
page 640
no Negates a command or sets its defaults page 641
proxy-arp Responds to ARP requests from the RON to a WLAN
on behalf of clients
page 642
TABLE 22 Wireless Configuration Commands
Command Description Ref.