Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 693
53-1001931-01
Wireless configuration commands
20
radius [accounting|
authentication-protocol|
dscp|
dynamic-authorization|
dynamic-vlan-assignment|
mac-auth-format|
wireless-client|
reauth|server]
Configures RADIUS parameters for the select WLAN.
• accounting [mode|server|timeout] – Sets RADIUS
accounting parameters.
• mode [start-stop|stop-only|start-interim-stop] – Sets
the Accounting Mode.
• start-stop – Sends accounting start-stop.
• stop-only – Sends accounting stop-only.
• start-interim-stop interval <60-3600> – Sets the
time interval between successive accounting
updates to a value in the range 60 to 3600 secs.
• server [primary|secondary] [<IP> {acct-port <port>}|
radius-key [0 <key>|2 <key>|<key>]] – Sets the
primary or secondary RADIUS server for the selected
WLAN.
• primary – Sets primary RADIUS server information.
• secondary – Sets secondary RADIUS server
information.
• <IP> – Sets the IP address of the RADIUS server.
• acct-port <port> – Sets the optional radius server
accounting port. Default is 1813.
• radius-key [0 <key>|2 <key>|<key>] – Sets the
radius-key for the RADIUS server.
• 0 <key> – The key is sent unencrypted.
• 2 <key> – The key is sent encrypted with the
password-encryption secret.
• <key> – The shared key.
• timeout <1-300> – Sets the time the wireless controller
waits for a response from the RADIUS server before
retrying accounting.
• <1-300> – The time duration in seconds.