72 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
show
2
Parameters
access-group
[<interface-name>
|all|ge|me1|role|sa|>
|vlan <1-4094>]
Displays the ACLs attached to an interface
• <interface-name> – Enter the name of the interface to which
the ACL is associated. access-group lists the details of the
ACLs configured on the particular Layer 3 or Layer 2
interface.
• vlan <1-4094> – Enter the name of the VLAN interface to
which the ACL is associated
• all – Display ACLs attached on all interfaces
• ge <1-4> – Gigabit Ethernet interface
• me1– FastEthernet interface
• role <role-name> – Specify role name
• sa <1-4> – Static Aggregate interface
arp Displays existing entries in the Address Resolution Protocol (ARP)
table
ddns binding Displays the DDNS configuration
• binding – DNS address bindings
dhcp [binding|class|pool
|sharednetwork]
Displays the DHCP server configuration
• binding manual – DNS address bindings
• manual – Static DHCP Address Bindings class – Configures
the DHCP server class
• pool – DHCP pool designation
• sharednetwork – Shared network information
dhcp-vendor-options DHCP Option 43 parameters received from DHCP server
domain-name Displays domain name information
dos [config|stats] Denial of Service configuration
• config – Displays ip dos configuration
• stats – Displays ip dos stats
http
[secure-server|server]
Hyper Text Transfer Protocol (HTTP)
• secure-server – Secure HTTP server
• server – HTTP server
interface
[<interface-name>|brief|ge
|me1|sa|
vlan]
Use the show ip interface command to display the administrative
and operational status of all Layer-3 interfaces or a specified
Layer-3 interface.
• <interface-name> – Interface name
• brief – Brief summary of the IP status and its configuration
• vlan <1-4094> – VLAN Interface
• ge <1-4>– GigabitEthernet interface
• me1– FastEthernet interface
• sa <1-4> – Static Aggregate interface
igmp snooping
[mrouter|querier|vlan]
Displays Internet Group Management Protocol
• snooping – IGMP Snooping
• mrouter – Displays Multicast Router
• querier – Configure IGMP querier
• vlan [ <1-4094>|<vlan-list>] – Identify the vlan to use
name-server Displays static and dynamic name-server entries