Brocade Communications Systems RFS7000 Network Router User Manual


 
704 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Wireless configuration commands
20
test
Wireless configuration commands
Testing neighbor report on air
Supported in the following platforms:
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
Syntax
RFSController(config-wireless)test dot11k [make-bcn-rep|
send-beacon-req|send-nbr-rep]
RFSController(config-wireless) test dot11k make-bcn-rep mu <MAC> neighbor
<MAC>
RFSController(config-wireless) test dot11k send-beacon-req
<1-8192> measurement-duration <100-10000>
RFSController(config-wireless) test dot11k send-beacon-req
[mu|MU] <MAC> measurement-duration <100-10000>
RFSController(config-wireless) test dot11k send-nbr-rep mu <MAC> neighbor
Parameters
Example
RFController(config-wireless)#test dot11k send-beacon-req 9
measurement-duration 999
RFController(config-wireless)#
make-bcn-rep mu <MAC>
neighbor <MAC>
Making the beacon report
mu – Displays client’s mac address
neighbor – Displays neighbor radio's BSS ID
MAC – Displays mac address in AA-BB-CC-DD-EE-FF
format
send-beacon-req
[<1-8192>|MU|mu]
Triggers the beacon send request
<1-8192> – A single index
MU – A list (eg: 1,3,7) or range (eg: 3-7) of indices
mu – Displays client’s mac address
MAC –Displays mac address in AA-BB-CC-DD-EE-FF
format
measurement-duration <100-10000> – Specifies
measurement duration in TUs
<100-10000> – Specifies range of measurement
duration
send-nbr-rep mu <MAC> Triggers the neighbor report send operation
mu – Displays client’s mac address
MAC – Displays mac address in AA-BB-CC-DD-EE-FF
format