Filter
Top Products
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 263
53-1001931-01
Global Configuration commands
5
Parameters
Example
RFController(config)#logging on
RFController(config)#logging aggregation-time 20
RFController(config)#logging buffered critical
RFController(config)#logging console critical
RFController(config)#logging facility local6
RFController(config)#logging monitor emergencies
RFController(config)#logging syslog notifications
RFController(config)#show logging
Logging module: enabled
aggregation-time <1-60> Sets the number of seconds for aggregating repeated messages.
The value can be configured between 1-60 seconds.
buffered [<0-7>|alerts|
critical|debugging|
emergencies|errors|
informational|
notifications|warnings]
Sets the buffered logging level
• <0-7> – Enter the logging severity level (0-7)
• alerts – Immediate action needed, (severity=1)
• critical – Critical conditions, (severity=2)
• debugging – Debugging messages, (severity=7)
• emergencies – System is unusable, (severity=0)
• errors – Error conditions, (severity=3)
• informational – Informational messages, (severity=6)
• notifications – Normal but significant conditions, (severity=5)
• warnings – Warning conditions, (severity=4)
console [<0-7>|alerts|
critical|debugging|
emergencies|errors|
informational|
notifications|warnings]
Sets the console logging level.
facility [local0|local1|
local2|local3|local4|
local5|local6|local7]
Syslog facility in which log messages are sent.
• local0 – Syslog facility local0
• local1 – Syslog facility local1
• local2 – Syslog facility local2
• local3 – Syslog facility local3
• local4 – Syslog facility local4
• local5 – Syslog facility local5
• local6 – Syslog facility local6
• local7 – Syslog facility local7
host <IP> Configures a remote host to receive log messages.
• <IP>– Remote host's IP address.
monitor [<0-7>|alerts|
critical|debugging|
emergencies|errors|
informational|
notifications|warnings]
Sets the terminal lines logging level.
on Enables the logging of system messages.
syslog [<0-7>|alerts|
critical|debugging|
emergencies|errors|
informational|
notifications|warnings]
Sets the syslog servers logging level.