256 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Global Configuration commands
5
route
[<IP-destination-prefix>
<IP-destination-prefix-mask
>|<IP-destination-prefix/Ma
sk>] <gateway-IP>
Adds a static route entry in the routing table.
• <IP-destination-prefix>– IP destination prefix
• <IP-destination-prefix-mask> – Mask for the
<IP-destination-prefix> IP
• <IP-destination-prefix/Mask> – IP destination prefix with
mask
• <gateway-IP> – IP address of the next hop used to
reach the destination
routing Turns on IP routing
ssh {[port <port>|rsa
keypair-name
<key-pair-name>]}
Sets up the Secured Shell (SSH) server
• port <port> – Optional. Defines the listening port (set
between 0-65536)
• rsa keypair-name <key-pair-name> – Optional. Sets the RSA
encryption key used for configuring RSA keypair
telnet {port <port>} Configures the Telnet server.
• port <port> – Optional. Defines the listening port ID (set
between 0-65535)
dos [ascend|
bcast-mcast-icmp|
chargen|enable|fraggle|
ftp-bounce|
invalid-protocol|
option-route|router-advt|
router-solicit|smurf|
snork|tcp-intercept|
tcp-max-incomplete|
twinge]
log [<0-8>|
alerts|
critical|
debugging| |emergencies|
errors|
informational|
none|
notifications|
warnings]
Configures the Denial of Service (DOS) attack parameters.
• ascend – Enables Ascend DoS checks
• bcast-mcast-icmp – Detects Broadcast/Multicast Icmp traffic
as attack
• chargen – Enables chargen DoS checks
• enable – Enables all DoS checks
• fraggle – Enables fraggle DoS checks
• ftp-bounce – Enables FTP bounce logs and sets the logging
levels
• invalid-protocol – Enables Invalid Protocol DoS attack check
and sets the logging levels for this attack
• option-route – Enables IP option route check
• router-advt – Enables ICMP router advertisement check
• router-solicit – Enables ICMP router solicit check
• smurf log – Enables smurf attack check
• snork – Enables check for packets
• tcp-intercept – Enables TCP intercept
• twinge – Enables twinge check
For all the above DoS attacks, the following log options can be set.
• <0-8> – Select one numerical log level. All messages
with and below this severity are logged
• emergencies – System is unusable (level 0)
• alerts – Immediate action needed (level 1)
• critical – Critical conditions (level 2)
• errors – Error conditions (level 3)
• warnings – Warning conditions (level 4)
• notifications – Normal but significant conditions
(level 5)
• informational – Informational messages (level 6)
• debugging – Debugging messages (level 7)
• none –Disable logging (level 8)