Filter
Top Products
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 653
53-1001931-01
Wireless configuration commands
20
short-gi enable Enables the Short GI value for both the 20 MHz and the 40 MHz
channels for the 11n radio.
short-preamble Enables support for the short preamble.
NOTE: This disables support for long preamble. Mobiles that only
support long preamble will not be able to associate.
speed
[1|11|12|18|2|24|
36|48|54|5p5|6|9|basic
1|
basic11|basic11a|
basic11an|basic11b1|
basic11b2|basic11bg|
basic11bgn|basic11g|
basic11gn|basic11n|
basic12|basic18|basic2|
basic24|basic36|basic48|
basic54|basic5p5|basic6|
basic9|range|throughput|
default]
Configures the basic and supported data rates/speed
• 1 1-Mbps
• 11 11-Mbps
• 12 12-Mbps
• 18 18-Mbps
• 2 2-Mbps
• 24 24-Mbps
• 36 36-Mbps
• 48 48-Mbps
• 54 54-Mbps
• 5p5 5.5-Mbps
• 6 6-Mbps
• 9 9-Mbps
• basic1 basic 1-Mbps
• basic11 basic 11-Mbps
• basic11a rate set (6,12,24 Mbps)
• basic11an rate set (6,12,24, MCS 0-7)
• basic11b1 rate set (1 and 2 Mbps)
• basic11b2 rate set (1,2,5.5,11 Mbps)
• basic11bg rate set (1,2,5.5,11,6,12,24 Mbps)
• basic11bgn rate set (1,2,5.5,11,6,12,24, MCS 0-7)
• basic11g rate set (6,12,24 Mbps)
• basic11gn rate set (6,12,24, MCS 0-7)
• basic11n rate set (MCS 0-7)
• basic12 basic 12-Mbps
• basic18 basic 18-Mbps
• basic2 basic 2-Mbps
• basic24 basic 24-Mbps
• basic36 basic 36-Mbps
• basic48 basic 48-Mbps
• basic54 basic 54-Mbps
• basic5p5 basic 5.5-Mbps
• basic6 basic 6-Mbps
• basic9 basic 9-Mbps
• default {mcs <msc-range>} – Factory default rates based on
radio-type.
• throughput {mcs <msc-range>} – All rates basic (only
802.11g clients are allowed on 802.11bg radios).
• range {mcs <msc-range>} – all rates enabled, the lowest one
set to basic
• mcs – Configure the mcs rates / speed
• MCS – A list or range (eg: 0-5, 10,15) of MCS rates
(0 to 15)
timeout <40-180> The time out value in seconds for the selected radio.