Filter
Top Products
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 57
53-1001931-01
Common commands
2
NOTE
The no service password-encryption command used to disable the encryption, now requires the
user to know the old password. The user will have to enter the old password to disable the
encryption.
Earlier, using
no service password-encryption disabled the encryption and show running config
displayed the passwords as plaintext.
Now, the user has to user
no service password-encryption <old password key> to disable or
change the password.
Example
RFController#service diag ?
enable Enable in service diagnostics
identify Identify this controller by flashing the LEDs in a
rapidly changing pattern
limit diagnostic limit command
period Set diagnostics period
tech-support-period Set diagnostics tech-support period
tech-support-url Set the URL to use during auto generated technical
support dumps
RFController#service diag enable
RFController#service diag limit ?
buffer buffer usage warning limit
fan Fan speed limit
filesys file system freespace limit
load agregate processor load
maxFDs maximum number of file descriptors
pkbuffers packet buffer head cache
procRAM percent RAM used by a process
ram percent free RAM
routecache IP route cache usage
temperature temperature limit
RFController#service diag limit buffer ?
128 128 byte buffer limit
128k 128k byte buffer limit
16k 16k byte buffer limit
1k 1k byte buffer limit
256 256 byte buffer limit
2k 2k byte buffer limit
32 32 byte buffer limit
32k 32k byte buffer limit
4k 4k byte buffer limit
512 512 byte buffer limit
64 64 byte buffer limit
64k 64k byte buffer limit
8k 8k byte buffer limit
RFController>service show command-history
Configured size of command history is 200
Date & Time User Location Command
===========================================================
May 31 21:57:44 2010 admin vty 130 exit